S100 Power Bike Shampoo 1Ltr

S100 Power Bike Shampoo 1Ltr

New Foam Technology for powerful and ultra-gentle cleaning

Contamination and dirt on the motorcycle can cause scratches during the shampoo wash (hand wash). We recommend using the S100 Power Bike Shampoo as a pre-cleaner with a foam sprayer or foam lance and for subsequent hand wash as a shampoo.

NEW FOAM TECHNOLOGY: Dynamic changes to the foam bubbles ensure a micro-mechanical cleaning effect. This loosens the dirt from the surface actively, binds it to the foam and removes it from the surface. 

• 2 in 1 product: pre-cleaner & shampoo
• Extremely powerful cleaning performance
• Very gentle on all surfaces 
• Does not remove wax and sealing coats

Rinse coarse dirt off with a large amount of water. 
• Using the foam hose (pressure washer): Fill the product into the tank undiluted. 
• Using the foam sprayer: Add 1.5 to 2 caps (one cap = 30 ml) to 1 L water. 
Apply the foam to the motorcycle and wait for 2 to 3 minutes for it to take effect. Then rinse thoroughly with clean water. 
• Using as a shampoo (hand wash): Place 2 to 3 caps to a bucket and add 5 L water to foam it up. Wash the motorcycle from top to bottom with a S100 The Wash Mitt or the S100 The Sponge. Then rinse thoroughly with clean water and dry the motorcycle. 

Tip: The two-bucket method is ideal for gentle hand washing. One bucket with clean water and the second filled with water including a suitable cleaning agent.

ALWAYS TEST ON A SMALL INCONSPICOUS AREA PRIOR TO USE TO ENSURE SURFACE COMPATIBILITY